E-106

Model: E-106
Agent A (main agent)
Color: colorless and transparent
Appearance: Liquid
Viscosity (cps/25 ℃): 25000-45000
Specific gravity: 1.17
B agent (hardener)
Color: Light Yellow
Appearance: Liquid
Viscosity (cps/25 ℃): 2000-40000
Specific gravity: 1
Mix ratio: 2:1
Mixed viscosity: 25000-35000
Operation time: 15 minutes
Curing time: 8h
Temperature resistance: -40 ℃~120 ℃

Product Features
1. Fast curing time and quick positioning;
2. Good toughness, resistant to mechanical vibration and thermal shock;
3. High shear and peel strength, with excellent adhesion to most substrates.

Suitable occasions
This product is a two-component, room temperature curing, low odor epoxy structural adhesive suitable for bonding metals, ceramics, glass, rubber, hard plastics, and most commonly used materials. It can replace Loctite E-20HP.

Pre treatment of usage: The substrate surface needs to remove coatings, oxide layers, oil, dust, release agents, and other surface pollutants.
Glue application: This product can be mixed with the main agent and curing agent by manual stirring or static mixing tube, and then evenly coated on the surface to be bonded.
Curing: This product can cure at room temperature and achieve the rated adhesive strength at 25 ℃. Heating can increase the curing speed. Overflow gel: The uncured gel that overflows can be removed with ketone solvents.

Notes:
This product is not suitable for bonding in chlorine gas, pure oxygen, or oxygen rich environments, as well as strong oxidizing substances.
It is recommended to store in a cool and dry place at 8-28 ℃. Unused colloids should not be returned to their original packaging.