1363C

Model: 1363C
Packaging: 30ml, 50ml
Color: Transparent yellowish liquid
Viscosity (MPa·s): 6000-20000 (adjustable)
Initial setting / Full setting: 15-60min / 24h
Maximum gap filling (mm): 0.5
Shear strength (MPa): ≥15
Temperature range: -50°C to 150°C

Product Features
1. Single component, room temperature curing;
2. No whitening, no wire drawing, easy to wipe;
3. High curing strength, good toughness, and impact resistance;
4. Compliant with ROHS environmental protection requirements.

Suitable occasions
Used for bonding most plastic, metal, and wood products, it can replace heating curing hot melt adhesives, especially for self-adhesive or mutual bonding of plastics (ABS, PC, ABS/PC, PET, acrylic, etc.), which have strong adhesive strength and are suitable for various purposes such as bonding consumer electronic components, plastic bonding, and component reinforcement.

Instructions for use
1. Pre treatment: The surface of the bonded material should be clean, free of grease, and most surfaces should not be subjected to special pre-treatment;
2. Glue application: Apply an appropriate amount of this product evenly on the surface of the substrate;
3. Removal: The spilled glue can be wiped with a dust-free cloth or a dust-free cloth with alcohol.

Precautions
This product should not be exposed to air for a long time during use and should be stored in a sealed container;
Storage temperature 5 ℃ -25 ℃